Sourced from @​openzeppelin/contracts's releases.

v4.8.3

Note This release contains fixes for GHSA-mx2q-35m2-x2rh and GHSA-93hq-5wgc-jc82.

• GovernorCompatibilityBravo: Fix encoding of proposal data when signatures are missing.
• TransparentUpgradeableProxy: Fix transparency in case of selector clash with non-decodable calldata or payable mutability. (#4154)

v4.8.2

Note This release contains a fix for GHSA-878m-3g6q-594q.

• ERC721Consecutive: Fixed a bug when _mintConsecutive is used for batches of size 1 that could lead to balance overflow. Refer to the breaking changes section in the changelog for a note on the behavior of ERC721._beforeTokenTransfer.

Breaking changes

• ERC721: The internal function _beforeTokenTransfer no longer updates balances, which it previously did when batchSize was greater than 1. This change has no consequence unless a custom ERC721 extension is explicitly invoking _beforeTokenTransfer. Balance updates in extensions must now be done explicitly using __unsafe_increaseBalance, with a name that indicates that there is an invariant that has to be manually verified.

v4.8.1

• ERC4626: Use staticcall instead of call when fetching underlying ERC-20 decimals. (#3943)

v4.8.0

Note Don't miss the section on Breaking changes at the end.

• TimelockController: Added a new admin constructor parameter that is assigned the admin role instead of the deployer account. (#3722)
• Initializable: add internal functions _getInitializedVersion and _isInitializing (#3598)
• ERC165Checker: add supportsERC165InterfaceUnchecked for consulting individual interfaces without the full ERC165 protocol. (#3339)
• Address: optimize functionCall by calling functionCallWithValue directly. (#3468)
• Address: optimize functionCall functions by checking contract size only if there is no returned data. (#3469)
• Governor: make the relay function payable, and add support for EOA payments. (#3730)
• GovernorCompatibilityBravo: remove unused using statements. (#3506)
• ERC20: optimize _transfer, _mint and _burn by using unchecked arithmetic when possible. (#3513)
• ERC20Votes, ERC721Votes: optimize getPastVotes for looking up recent checkpoints. (#3673)
• ERC20FlashMint: add an internal _flashFee function for overriding. (#3551)
• ERC4626: use the same decimals() as the underlying asset by default (if available). (#3639)
• ERC4626: add internal _initialConvertToShares and _initialConvertToAssets functions to customize empty vaults behavior. (#3639)
• ERC721: optimize transfers by making approval clearing implicit instead of emitting an event. (#3481)
• ERC721: optimize burn by making approval clearing implicit instead of emitting an event. (#3538)
• ERC721: Fix balance accounting when a custom _beforeTokenTransfer hook results in a transfer of the token under consideration. (#3611)
• ERC721: use unchecked arithmetic for balance updates. (#3524)
• ERC721Consecutive: Implementation of EIP-2309 that allows batch minting of ERC721 tokens during construction. (#3311)
• ReentrancyGuard: Reduce code size impact of the modifier by using internal functions. (#3515)
• SafeCast: optimize downcasting of signed integers. (#3565)
• ECDSA: Remove redundant check on the v value. (#3591)
• VestingWallet: add releasable getters. (#3580)
• VestingWallet: remove unused library Math.sol. (#3605)
• VestingWallet: make constructor payable. (#3665)
• Create2: optimize address computation by using assembly instead of abi.encodePacked. (#3600)
• Clones: optimized the assembly to use only the scratch space during deployments, and optimized predictDeterministicAddress to use fewer operations. (#3640)
• Checkpoints: Use procedural generation to support multiple key/value lengths. (#3589)

... (truncated)

Sourced from @​openzeppelin/contracts's changelog.

4.8.3 (2023-04-13)

• GovernorCompatibilityBravo: Fix encoding of proposal data when signatures are missing.
• TransparentUpgradeableProxy: Fix transparency in case of selector clash with non-decodable calldata or payable mutability. (#4154)

4.8.2 (2023-03-02)

• ERC721Consecutive: Fixed a bug when _mintConsecutive is used for batches of size 1 that could lead to balance overflow. Refer to the breaking changes section in the changelog for a note on the behavior of ERC721._beforeTokenTransfer.

Breaking changes

• ERC721: The internal function _beforeTokenTransfer no longer updates balances, which it previously did when batchSize was greater than 1. This change has no consequence unless a custom ERC721 extension is explicitly invoking _beforeTokenTransfer. Balance updates in extensions must now be done explicitly using __unsafe_increaseBalance, with a name that indicates that there is an invariant that has to be manually verified.

4.8.1 (2023-01-13)

• ERC4626: Use staticcall instead of call when fetching underlying ERC-20 decimals. (#3943)

4.8.0 (2022-11-08)

• TimelockController: Added a new admin constructor parameter that is assigned the admin role instead of the deployer account. (#3722)
• Initializable: add internal functions _getInitializedVersion and _isInitializing (#3598)
• ERC165Checker: add supportsERC165InterfaceUnchecked for consulting individual interfaces without the full ERC165 protocol. (#3339)
• Address: optimize functionCall by calling functionCallWithValue directly. (#3468)
• Address: optimize functionCall functions by checking contract size only if there is no returned data. (#3469)
• Governor: make the relay function payable, and add support for EOA payments. (#3730)
• GovernorCompatibilityBravo: remove unused using statements. (#3506)
• ERC20: optimize _transfer, _mint and _burn by using unchecked arithmetic when possible. (#3513)
• ERC20Votes, ERC721Votes: optimize getPastVotes for looking up recent checkpoints. (#3673)
• ERC20FlashMint: add an internal _flashFee function for overriding. (#3551)
• ERC4626: use the same decimals() as the underlying asset by default (if available). (#3639)
• ERC4626: add internal _initialConvertToShares and _initialConvertToAssets functions to customize empty vaults behavior. (#3639)
• ERC721: optimize transfers by making approval clearing implicit instead of emitting an event. (#3481)
• ERC721: optimize burn by making approval clearing implicit instead of emitting an event. (#3538)
• ERC721: Fix balance accounting when a custom _beforeTokenTransfer hook results in a transfer of the token under consideration. (#3611)
• ERC721: use unchecked arithmetic for balance updates. (#3524)
• ERC721Consecutive: Implementation of EIP-2309 that allows batch minting of ERC721 tokens during construction. (#3311)
• ReentrancyGuard: Reduce code size impact of the modifier by using internal functions. (#3515)
• SafeCast: optimize downcasting of signed integers. (#3565)
• ECDSA: Remove redundant check on the v value. (#3591)
• VestingWallet: add releasable getters. (#3580)
• VestingWallet: remove unused library Math.sol. (#3605)
• VestingWallet: make constructor payable. (#3665)
• Create2: optimize address computation by using assembly instead of abi.encodePacked. (#3600)
• Clones: optimized the assembly to use only the scratch space during deployments, and optimized predictDeterministicAddress to use fewer operations. (#3640)
• Checkpoints: Use procedural generation to support multiple key/value lengths. (#3589)
• Checkpoints: Add new lookup mechanisms. (#3589)
• Arrays: Add unsafeAccess functions that allow reading and writing to an element in a storage array bypassing Solidity's "out-of-bounds" check. (#3589)
• Strings: optimize toString. (#3573)
• Ownable2Step: extension of Ownable that makes the ownership transfers a two step process. (#3620)
• Math and SignedMath: optimize function max by using > instead of >=. (#3679)

... (truncated)

• 0a25c19 4.8.3
• 7bdd255 Update changelog
• ea595f5 Merge pull request from GHSA-93hq-5wgc-jc82
• 61b45a2 Improve docs for transparent proxy (#4181)
• db9ee95 Merge changesets for transparency improvements (#4165)
• c01ea99 Fix TransparentUpgradeableProxy's transparency (#4154)
• 8dfeb5d Improve TransparentUpgradeableProxy's transparency (#3977)
• 9eee01c Bump and pin Forge Std submodule (#4102)
• d00acef 4.8.2
• ab9cc4c Ignore reentrancy inexecuteBatch and update Slither config (#3955)
• Additional commits viewable in compare view

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)